| ITEM: BID 1-3.9 SCREEN PRINTED | 250 | 500 | 1000 | 2500 | 5000 | CLASS | WT/100 |
| 1 to 3.9 sq in BRASS - Screened | 2.20 | 2.04 | 1.77 | 1.53 | 1.43 | 2AB2C | 2.8 lb. |
| EA ADDL COLOR-Screened | .50 | .45 | .40 | .37 | .31 | G | |
| Add per plate for Two-Way Tape | .41 | .40 | .39 | .37 | .36 | G | |
| Add per plate for Foam Two-Way Tape | .47 | .46 | .45 | .44 | .41 | G | |
| Add per Plate for Four Holes | .29 | .28 | .27 | .25 | .24 | G | |
| Add per Plate for Rounded Corners | .27 | .25 | .24 | .23 | .22 | G |
Imprint cannot bleed , 1/16" un-imprinted border required .
• MATERIAL : . 020 thick Solid
Satin Brass .
• EXACT PLATE SIZES: A
tolerance of + or - 1/32" must be
allowed on all plates.
This is extremely important to customers
who will placing the plates into a recessed area
that the plate must fit.
A product proof is recommended if the plate
must fit into something.
•MOUNTING HOLES: Holes must be
located on corners or edge of plates.
For holes in other locations call factory.
Exact hole placement is not guaranteed: A tolerance of + or -
1/64" to edge of plate or + or - 1/32" for hole center
to center must be allowed . Order a larger hole than needed
to compensate for this: e.g. need a 3/32" hole , order a 1/8"
hole to allow for the tolerances. This is extremely important
to customers who will mounting plates on equipment with pre-drilled
holes where the plate must match. A product proof is recommended in the
instance. HOLE SIZES AVAILABLE
3/32", 1/8", 5/32, 3/16", 1/4"
•ROUNDED CORNERS: Sizes available:
•PRESSURE SENSITIVE MOUNTING TAPE:
Standard two-way tape is intended for clean, dry, smooth
and flat surfaces. 1/32" thick foam two-way tape is for clean, dry and
flat surfaces that are lightly textured. If unsure, contact factory
for random samples to test on your application.
•CONSECUTIVE NUMBERING:
| 50 | 100 | 250 | 500 | 1000 | 2500 | 5000 | 10000 |
| .80 | .70 | .40 | .36 | .30 | .28 | .24 | .20 8(C) |
•EXTREME CONDITIONS: For
exposure to excessive heat,
oils, salt water, solvents etc., contact factory before ordering.
•PACKAGING: Individual Poly bags.
•LESS THAN MINIMUM:
Absolute minimum quantity 125 pieces.$40(C)
Multi-color imprints are not available on LTM orders.
•PRODUCTION TIME: 5-10
Working Days.
Call factory if a deadline is required.
•SET UP CHARGE: $60(G)
